General-purpose spun polypropylene sediment filter cartridge.
Fits in most standard 10" drop-in filter housing systems. Used in residential, commercial, and food-service applications as a sediment filter or pre-filter.
10 x 4.5 Sediment replacement filter 5 micron x1 Suits all standard 10 inch housings Premium filtration poly spun Suitable for countertop or undersink water filter models.

Features & Benefits
- The filter is 3-layer density type. The service life is 30% higher than the general sediment filter. Accurate micron rate control. The outer layer is 10 micron; the inner layer is 5 micron; the middle layer is 7 micron. 5 micron Particle removal rate is over 95%
- 100% Fresh Polypropylene.BPA Free
- Manufactured by fully automatic production line.Accurate and absolute micron rate control.

Applications
- Food and beverages
- Reverse Osmosis Pre filtration


Specifications
- Model Number: AB-PP1045
- Micron Rating: 5 Micron
- Min/Max Flow: 0 - 154 Lpm
- Min/Max Temperature: 0-52°C
- Min/Max Pressure: 100 - 800 kPa
- Size: Standard 4.5” x 10”
- Filtration Life: 6 Months
*Depends on water quality and level of contaminants.

Whole House Water Filter System Carbon Block 10"x4.5" Replacement Filter

CTO Carbon Block Water Filter
The Aqua Blue H20 Carbon Block 5 Micron filter is a Premium nominal carbon block filter cartridge made from 100% Coconut Carbon for the reduction of chlorine and removal of tastes, odours and potentially toxic chemicals.
Suitable for most applications including whole house, tank and dam systems.

Features & Benefits
- Effectively reduce unwanted tastes, odor, chlorine
- Cleaner, softer water for bathing, cleaning, washing
- No channeling, fluidizing, and bypassing
- Maximum service life and resistance to fouling
- Protects other water filters, heaters and appliances from sediment

Applications
- Food and beverages
- Oil and gas
- Electronics
- Reverse Osmosis Pre filtration
- Fine chemicals
- Metal finishing
- Pulp and paper

Cartridge Specifications And Performance Data
- Model: AP815-WF (B)
- Max. Flow: 0.75 gpm
- Max. Pressure: 120 psi
- Max.Temperature: 104º F
- Suggested Life: 3500 gal
- Micron Rating: 5 micron
- Size: Standard 4.5" x 10"

*Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions.
Directions for use: Place cartridge in an appropriate housing(10"x4.5") and flush for a minimum of 5 minutes prior to use. This will flush away any loose particals that may be present in the cartridge. These particals are known as carbon fines.
Warning: For correct operation of this, it is essential to observe manufacturers instructions.